This super fast lamp has three timer presets of 15, 30 and 60 seconds and a reflective inside so you can cure all your fingernails and thumbnail simultaneously. There’s also a removable metal tray, making it perfect for pedicures too.

Convex™ curing technology

Cures gel polish super fast

Timer features

Works for pedicures

It’s also the best LED nail lamp because it has a 24-month warranty, and it comes with UK, US and EU plugs, making it one of your most versatile pieces of kit.

It is compatible with all brands of gel polish, but for best results use with Mylee MyGel gel polish.

Please note the silver base plate is coated with a protective film. Remove this to expose the reflective plate and ensure and expert, hassle-free cure.

Specification:

Wavelength range: 405 nm

Voltage: 100-240V AC, 50/60Hz

Dimensions: 205cm (L) x 105 (H) x 160cm (D)

Directions

HOW TO APPLY GEL POLISH

1. Wash and dry your hands (do not apply any hand creams or oils). 2. Use the cuticle stick to gently push back cuticles. 3. Use Mylee nail file to shape the free edge of your nails. 4. Remove the shine from the nail plate with a buffing block. 5. Sanitise the nail plate with Prep + Wipe using Lint Free Wipes 6. Apply Mylee Base Coat and cure nails for 30 secs using Mylee LED Lamp or 120s when using the UV Lamp. 7. Apply one coat of the Gel Polish colour and cure nails for 30s using the LED Lamp or 120s with a UV Lamp. 8. Apply Mylee Top Coat and cure nails for 30s LED Lamp or 120s UV Lamp. 9. Sanitise the Top Coat using Prep + Wipe and the lint-free wipes. 10. Apply cuticle oil on cuticles.

HOW TO REMOVE GEL POLISH

1. Buff the surface of the nails with a nail file to remove the shine of the topcoat. This must be done firmly as the surface must be opened up to allow you to penetrate the UV lacquer, but be careful not to damage the nail. 2. Soak a cotton pad with Mylee Gel Remover and place onto the nail plate, securing with a foil wrap. 3. After 10 minutes, firmly pull pads off the nails, making sure you gently push away any loose product with a cuticle pusher or orange stick. 4. If there is product remaining on the nail, re-buff and re-wrap the nail. 5. Once all the product is removed, file and shape the free edge using a nail file then buff the nail to a shine.